Moto Guzzi Ducati 3 Pin to 16 Pin OBD Adaptor

Now the best OBD Adaptor lead for Aprilia, Moto Morini, Gilera, Moto Guzzi, Ducati bikes and similarly based makes/models using the 3 pin socket. Also works with models such as the Aprilia RSV4, Tuono etc. Always check the connector on your bike to confirm.

Some other sellers provide a 3 pin connection which is not correct to mate with your bike’s diagnostic plug. It has a poor connection and can even damage the bike’s socket. Ours is the correct reciprocal plug.

Our adaptor not only uses sprung pins on the OBD female, for best electrical contact but also uses an inline DC socket so the supplied power lead with crocodile clips can be disconnected. This also allows you to optionally plug in your own 12v DC power, if you so wish. Providing a consistent supply – ideal when remapping and the bike battery gets low.

Ideal for use with TuneECU, GuzziDiag, JPDiag, DucatiDiag and similar. 

This will allow conversion from the standard 16 pin OBD socket on your main interface to the 3 pin FAL type. We also sell the one piece interface and plug with the USB PC interface.

Our clip incorporates +ve and -ve battery connection leads via crocodile clips.

Key Features:

# Quality made cable with perfect fit
# Detachable DC power lead with croc clips
# Sprung Pins in OBD socket for best contact
# Fast Dispatch
# 12 months warranty

Compatibility:

Works with certain Moto Guzzi, Gilera, Moto Morini, Ducati, Aprilia models as stated by GuzziDiag, TuneECU, DucatiDiag & other softwares. Please see their websites for full compatibility. Remember, your diagnostic software must cover relevant models to work. Always check which diagnostic socket you have to confirm.

TuneECU Adaptor Compatibility: B

Contents:

1 x 16 pin female to 3 pin FAL plug with inline DC socket
1 x Power Lead with Crocodile Clips (approx 60cm long)